15 July 2011

Getting Started

Hi all, I've started on a couple of Steam Era FQX flat wagon kits, but am converting one of them to an AQCY Australian National high speed superfreighter flat. Therefore, I'll be taking pictures along the way to help any of you who might want to make one of these wagons.

First off, you'll need to cut the body section from the sprue, neaten it up by removing flash and then remove both chain boxes from one end, as shown here. In front is the VQCX, then the underway AQCY and in the back is "one I've previously prepared" AKA AQCY 47.

No comments:

Post a Comment